GEPRC TAKER F722 BLS 65A V2 STACK 65A 4IN1 ESC Flight Controller Data Analyze Record Flight Data Plug and Play Racing FPV Drone

Features

1. Uses the mainstream STM32F722 chip

2. Equipped with the latest 42688-P gyroscope

3. 16M onboard black box storage

4. Integrated LC filter

5. Upgraded Type-C USB interface

6. Directly plugs into the D JI Air Unit

7. Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience

8. Simple and efficient installation method with shock absorbers for stable gyroscope performance

9. Dual independent BECs: 9V@2.5A and 5V@3A

Specifications

GEP-F722-HD v2 Flight Controller

• MCU: STM32F722

• IMU: ICM42688-P(SPI)

• Air Unit Connection:Direct plugging into D JI Air Unit

• Black Box: 16M onboard

• USB Interface: Type-C 

• Barometer: supported

• OSD: BetaFlight OSD w/ AT7456E chip

• BEC: 5V@3A,9V@2.5A dual BEC

• Firmware Target: GEPRCF722

• Dimension: 36.85x36.85mm, mounting hole size 30.5x30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

• Input Voltage: 3-6S LiPo 

• UART: 5

• Power Filter: Integrated LC filter

• Weight: 8.1g

TAKER H65_8S_BLS 65A 4IN1 ESC

• Input Voltage: 3-8S Lipo

• Ammeter: Supported

• Continuous Current：65A

• Burst Current：70A（5 seconds）

• Support Protocol: Dshot 150/300/600

• Dimension：42x45.7mm,mounting hole size30.5x30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

• Weight: 14.9g

• Firmware Target: B_X_30

Includes

1 x FC board
1 x ESC board
1 x Capacitor
1 x D JI Air Unit adapter cable
1 x Flight controller adapter cable
1 x XT60 power cable
4 x M3*30 screws
4 x M3*25 screws
8 x Nylon nuts
8 x Silicone anti-shake pads
2 x sh1.0 4pin silicone cable
1 x Camera connection cable