Summary
In the GEPRC family, we have welcomed a new member: Tern-LR40. This is a 4-inch long range FPV with excellent performance and reliability. It adopts a DC-type structure. Its careful lightweight design uses aviation-grade 7075 aluminum parts. Light and rigid.
Equipped with TAKER G4 45A 8Bit AIO flight control, which has higher computing power redundancy. The use of a top-mounted fixed GPS can avoid the impact of its own electromagnetic interference on flight, and the rescue function is more stable.Silicone camera shock-absorbing pad prevents high-frequency jello from O3 camera.
The Tern-LR40 is like a bird with spread wings, flying freely through the blue sky without being restrained. Choosing it is not only a high-quality flight, but also an artistic journey.
Feature
-
New lightweight design, weight under 249g.
-
Expand interference GPS fixation method and stay away from interference sources
-
DC structure cannot see the propellers during flight, which is more suitable for straight-line aerial photography.
-
Install BB ring to set the battery low voltage alarm
-
Using GEP-M10nano GPS, the satellite search speed is faster and the rescue mode is more stable.
-
Compatible go pro mount installation, expandable shooting creation.
Specifications
-
Model: Tern-LR40
-
Frame: Tern-LR40 frame
-
Top plate: 1.5mm
-
Middle plate: 2.0mm
-
Bottom plate: 1.5mm
-
Arm thickness: 3.5mm
-
FC: TAKER G4 45A BLS AIO
-
MCU: STM32G473CEU6
-
Gyro: ICM 42688-P
-
OSD: Betaflight OSD w/AT7456E
-
ESC: 45A 8Bit ESC
-
VTX: RAD mini 1W
-
Camera: Caddx Ratel2
-
Antenna: GEPRC Peano 5.8G RHCP UFL
-
Connector:XT30
-
Motors: GEP-SPEEDX2 1404 3000KV
-
Propellers: HQProp T4X2.5Grey (2CW+2CCW)
-
Tern -LR40 Analog ELRS24 version weight: 159g±5g
-
Receiver: PNP/GEPRC ELRS24/GEPRC ELRS915/TBS Nano RX
-
Recommended battery: LiPo 4S 660mah-850mah/18650 3000mah
-
time: 10-25min
-
Including:
1 x Tern-LR40
2 x HQProp T4X2.5Grey (2CW+2CCW)
2 x battery anti-slip mat
1 x screw pack
4 x Battery strap M15*170mm
1 x L-shaped screwdriver 1.5mm
1 x camera mount holder
1 x T-type Antenna mount
1 x RC Printed